Carl Stahl Sava Industries, Cable Assemblies



Carl Stahl Sava Industries, Inc.
4 North Corporate Dr., PO Box 30
Riverdale, NJ 07457-0030
Tel.: (973) 835-0882
Fax: (973) 835-0877
Cable Fittings


Cable Fittings
(PDF 1.1 MB)

Product Line »
Cable Fittings »
Ball & Strap Fittings
Ball

GENERAL NOTES:
Strength–on 1/16 and 3/32 cables with constructions of 7x7 or 7x19, ball fittings hold 80% of rated breaking strength. All others over 3/32 develop 60% of rated cable strength on 7x7 or 7x19 constructions. For 3/64 and below consult factory for breaking strength.
For other ball sizes, or for strength of fittings swaged over plastic, consult factory. Balls can be swaged along the length of the cable. Before swage, ball fittings are oval in shape.
Dimensions shown are after swaging.
If ball is ordered loose, please state cable diameter you intend to use. Hand tools are not available. It is recommended that Sava assemble them for you.

Ball

Part No. For Cable Dia. B ± .005 Material
552S .006 - .014 .035 StainlessSteel
553S .006 - .024 .060 Stainless Steel
555B .006 - .024 .080 Brass
557B or
557S		 .009 - .036 .090 Brass or
Stainless Steel
560B or
560S		 .014 - .050 .125 Brass or
Stainless Steel
562B or
562S		 .034 - 1/16 .156 Brass or
Stainless Steel
565B or
565S		 .034 - 1/16 .190 Brass or
Stainless Steel
570P .036 - 3/32 .250 Plated Steel
570S 3/32 .250 Stainless Steel
573P or
573S		 1/8 .310 Plated or
Stainless Steel
575S 5/32 .380 Stainless Steel
578S 3/16 .440 Stainless Steel
580P or
580S		 1/4 .570 Plated or
Stainless Steel
582S 5/16 .690 Stainless Steel

NOTE: 562 Balls with 1/16 cable hold min. 200 lbs.
Ball & Shank

GENERAL NOTES:
Dimensions shown are after swaging.
Strength–generate full rated breaking strength of cable except for 505 which holds 80% of rated breaking strength. *Per MS-20664
Hand tools not available. It is recommended that Sava assemble them for you.

Ball & Shank*

Part No. For Cable
Dia.		 A ± .010 B ± .010 Ls Ref. Material
505B
505S		 .012-.036 .075 .125 .085 Brass
Stainless Steel
510S1
510S2*		 3/64
1/16		 .112 .190 .156 Stainless Steel
Stainless Steel
515P
515S*		 3/32 .143 .253 .234 Plated Steel
Stainless Steel
520P
520S*		 1/8 .190 .315 .313 Plated Steel
Stainless Steel
522S* 5/32 .222 .379 .391 Stainless Steel
525P
525S*		 3/16 .255 .442 .470 Plated Steel
Stainless Steel
530S* 1/4 .348 .567 .625 Stainless Steel
535S* 5/16 .413 .694 .810 Stainless Steel
Strap Fork
(Ref. NAS 1435-K)*		 Strap Fork (Ref. NAS 1435-K)
Part No. Stainless Steel
Ref. NAS Part No.		 Cable Dia. A Ref. B Ref. C ± .010 D Ref. E Ref. F Ref. Lbs. per Piece
SF2 NAS 1435K-2 1/16 1-1/16 .454 .188 .042 3/8 .093 .006
SF3 NAS 1435K-3 3/32 1-1/2 .616 .188 .049 7/16 .108 .013
SF4 NAS 1435K-4 1/8 1-5/8 .638 .188 .093 1/2 .195 .030
Strap Eye
(Ref. NAS 1435-E)*		 Strap Eye (Ref. NAS 1435-E)
Part No. Stainless Steel
Ref. NAS Part No.		 Cable Dia. A Ref. B Ref. C ± .010 D Ref. E Ref. Lbs. per Piece
SE2 NAS 1435E-2 1/16 1-1/16 .454 .188 .088 3/8 .006
SE3 NAS 1435E-3 3/32 1-1/2 .616 .188 .103 7/16 .013
SE4 NAS 1435E-4 1/8 1-5/8 .638 .188 .190 1/2 .030

NOTE: *Ball and Shank is always recommended for use with strap terminals (noted above).

Home | Corporate Profile | Design Info | Markets Served | Sales Policies | Reps | Contact
Precision Miniature & Small Cables | Fittings | MIL Spec Cable & Fittings | Push-Pull Control Assemblies
Idler Pulleys | Tools & Cutters | Thimbles | Prototype Assemblies & Kit Packages