Carl Stahl Sava Industries



Carl Stahl Sava Industries, Inc.
4 North Corporate Dr., PO Box 30
Riverdale, NJ 07457-0030
Tel.: (973) 835-0882
Fax: (973) 835-0877
MIL Fittings


MIL Fittings
(PDF 322 KB)

Product Line »
MIL Spec Cable & Fittings »
MIL-DTL-83420 Cable

MIL-DTL-83420 cables are primarily used with MS-type terminals for both commercial aircraft and military applications. SAVA sells this cable in bulk or will quote your cable assembly design in compliance with MIL-T-6117 or MIL-T-781. We are fully equipped to proof load or prestress your assemblies to reduce constructional stretch and provide fitting reliability.

Type I Non-Jacketed Wire Rope
MIL-DTL-83420, Latest Amendment Composition B, Corrosion Resistant Steel

SAVA Part No. Nominal Cable Dia. Construction Tolerance on Diameter (Plus Only) Allowable Increase of Dia. at Cut End Minimum Breaking Strength Composition B Approximate Weight per 100 Feet
in. mm in. mm in. mm lbs. kg lbs. kg
S030 1/32 .79 3x7 .006 .152 .006 .152 110 50 0.16 0.07
S048 3/64 1.19 7x7 .008 .203 .008 .203 270 122 0.42 0.19
S064 1/16 1.59 7x7 .010 .254 .009 .229 480 218 0.75 0.34
S065 1/16 1.59 7x19 .010 .254 .009 .229 480 218 0.75 0.34
S094 3/32 2.38 7x7 .012 .305 .010 .254 920 418 1.60 0.72
S095 3/32 2.38 7x19 .012 .305 .010 .254 920 418 1.74 0.79
S126 1/8 3.18 7x19 .014 .356 .011 .279 1,760 798 2.90 1.31
S158 5/32 3.97 7x19 .016 .406 .017 .432 2,400 1089 4.50 2.04
S188 3/16 4.76 7x19 .018 .457 .019 .483 3,700 1678 6.50 2.95
S252 1/4 6.35 7x19 .018 .457 .021 .533 6,400 2903 11.00 4.99
S315 5/16 7.94 7x19 .022 .559 .024 .610 9,000 4082 17.30 7.85
S375 3/8 9.53 7x19 .026 .660 .027 .686 12,000 5443 24.80 11.00

Type II Jacketed Wire Rope
MIL-DTL-83420, Latest Amendment Composition B, Corrosion Resistant Steel with Nylon Jacket

SAVA Part No. Nominal Cable Dia. Construction Outside Diameter of Jacket Tolerance on Jacket O.D. (Plus Only) Jacket Wall Thickness (Reference) Approximate Weight per 100 Feet
in. mm in. mm in. mm in. mm lbs. kg
S030N047 1/32 .79 3x7 3/64 1.19 .008 .203 .008 .203 0.22 0.10
S048N063 3/64 1.19 7x7 1/16 1.59 .010 .254 .008 .203 0.49 0.22
S064N094 1/16 1.59 7x7 3/32 2.38 .012 .305 .016 .406 0.93 0.42
S064N125 1/16 1.59 7x7 1/8 3.18 .014 .356 .031 .787 1.18 0.53
S065N094 1/16 1.59 7x19 3/32 2.38 .012 .305 .016 .406 0.93 0.42
S065N125 1/16 1.59 7x19 1/8 3.18 .014 .356 .031 .787 1.18 0.53
S094N125 3/32 2.38 7x7 1/8 3.18 .014 .356 .016 .406 1.85 0.84
S094N156 3/32 2.38 7x7 5/32 3.97 .016 .406 .031 .787 2.18 0.99
S095N125 3/32 2.38 7x19 1/8 3.18 .014 .356 .016 .406 1.99 0.90
S095N156 3/32 2.38 7x19 5/32 3.97 .016 .406 .031 .787 2.32 1.05
S126N188 1/8 3.18 7x19 3/16 4.76 .018 .457 .031 .787 3.62 1.64
S158N218 5/32 3.97 7x19 7/32 5.56 .018 .457 .031 .787 6.10 2.77
S188N250 3/16 4.76 7x19 1/4 6.35 .018 .457 .031 .787 7.75 3.51
S252N313 1/4 6.35 7x19 5/16 7.94 .020 .508 .031 .787 12.30 5.58
S315N438 5/16 7.94 7x19 7/16 11.11 .024 .610 .063 1.60 19.80 8.98
S375N500 3/8 9.53 7x19 1/2 12.7 .027 .686 .063 1.60 27.20 12.34

Type I Non-Jacketed Wire Rope
MIL-DTL-83420, Latest Amendment Composition A, Carbon Steel, Tin or Zinc Coated

SAVA Part No. Nominal Cable Dia. Construction Tolerance on Diameter (Plus Only) Allowable Increase of Dia. at Cut End Minimum Breaking Strength Composition A Approximate Weight per 100 Feet
in. mm in. mm in. mm lbs. kg lbs. kg
G030 1/32 .79 3x7 .006 .152 .006 .152 110 50 0.16 0.07
G048 3/64 1.19 7x7 .008 .203 .008 .203 270 122 0.42 0.19
G064 1/16 1.59 7x7 .010 .254 .009 .229 480 218 0.75 0.34
G065 1/16 1.59 7x19 .010 .254 .009 .229 480 218 0.75 0.34
G094 3/32 2.38 7x7 .012 .305 .010 .254 920 418 1.60 0.72
G095 3/32 2.38 7x19 .012 .305 .010 .254 1,000 453 1.74 0.79
G126 1/8 3.18 7x19 .014 .356 .011 .279 2,000 907 2.90 1.31
G158 5/32 3.97 7x19 .016 .406 .017 .432 2,800 1270 4.50 2.04
G188 3/16 4.76 7x19 .018 .457 .019 .483 4,200 1905 6.50 2.95
G252 1/4 6.35 7x19 .018 .457 .021 .533 7,000 3175 11.00 4.99
G315 5/16 7.94 7x19 .022 .559 .024 .610 9,800 4445 17.30 7.85
G375 3/8 9.53 7x19 .026 .660 .027 .686 14,400 6532 24.30 11.00

Type II Jacketed Wire Rope
MIL-DTL-83420, Latest Amendment Composition A, Carbon Steel, Tin or Zinc Coated with Nylon Jacket

SAVA Part No. Nominal Cable Dia. Construction Outside Diameter of Jacket Tolerance on Jacket O.D. (Plus Only) Jacket Wall Thickness (Reference) Approximate Weight per 100 Feet
in. mm in. mm in. mm in. mm lbs. kg
G030N047 1/32 .79 3x7 3/64 1.19 .008 .203 .008 .203 0.22 0.10
G048N063 3/64 1.19 7x7 1/16 1.59 .010 .254 .008 .203 0.49 0.22
G064N094 1/16 1.59 7x7 3/32 2.38 .012 .305 .016 .406 0.93 0.42
G064N125 1/16 1.59 7x7 1/8 3.18 .014 .356 .031 .787 1.18 0.53
G065N094 1/16 1.59 7x19 3/32 2.38 .012 .305 .016 .406 0.93 0.42
G065N125 1/16 1.59 7x19 1/8 3.18 .014 .356 .031 .787 1.18 0.53
G094N125 3/32 2.38 7x7 1/8 3.18 .014 .356 .016 .406 1.85 0.84
G094N156 3/32 2.38 7x7 5/32 3.97 .016 .406 .031 .787 2.18 0.99
G095N125 3/32 2.38 7x19 1/8 3.18 .014 .356 .016 .406 1.99 0.90
G095N156 3/32 2.38 7x19 5/32 3.97 .016 .406 .031 .787 2.32 1.05
G126N188 1/8 3.18 7x19 3/16 4.76 .018 .457 .031 .787 3.62 1.64
G158N218 5/32 3.97 7x19 7/32 5.56 .018 .457 .031 .787 6.10 2.77
G188N250 3/16 4.76 7x19 1/4 6.35 .018 .457 .031 .787 7.75 3.51
G252N313 1/4 6.35 7x19 5/16 7.94 .020 .508 .031 .787 12.30 5.58
G315N438 5/16 7.94 7x19 7/16 11.11 .024 .610 .063 1.60 19.80 8.98
G375N500 3/8 9.53 7x19 1/2 12.7 .027 .686 .063 1.60 27.20 12.34

Home | Corporate Profile | Design Info | Markets Served | Sales Policies | Reps | Contact
Precision Miniature & Small Cables | Fittings | MIL Spec Cable & Fittings | Push-Pull Control Assemblies
Idler Pulleys | Tools & Cutters | Thimbles | Prototype Assemblies & Kit Packages