Carl Stahl Sava Industries, Cable Assemblies,



Carl Stahl Sava Industries, Inc.
4 North Corporate Dr., PO Box 30
Riverdale, NJ 07457-0030
Tel.: (973) 835-0882
Fax: (973) 835-0877
MIL Fittings


MIL Fittings
(PDF 322 KB)

Product Line »
Spec Cable & Fittings »
MIL Spec Cable & Fittings

MS-20663 Ball and Double Shank

Ms Part No. Stainless Steel For Cable DIA. As DIA. Bs Spherical DIA. La Approx. Rs Max Rad.
MS-20663-C1* 1/32 - 3/64 .075 REF. .125 ± .003 .180 .012
MS-20663-C2 1/16 .112 + .000
- .003		 .190 + .000
- .003		 .390 .014
MS-20663-C3 3/32 .143 .253 .578 .019
MS-20663-C4 1/8 .190 .315 .765 .023
MS-20663-C5 5/32 .222 + .000
- .004		 .379 + .000
- .004		 .953 .028
MS-20663-C6 3/16 .255 + .000
- .005		 .442 + .000
- .005		 1.140 .033
MS-20663-C7 7/32 .302 .505 1.328 .038
MS-20663-C8 1/4 .348 .567 1.515 .042
MS-20663-C9 9/32 .382 + .000
- .007		 .632 + .000
- .007		 1.719 .046
MS-20663-C10 5/16 .413 .694 1.875 .046
NOTES: *SAVA’s P/N MS-20663-C1 has no applicable military specification. All measurements in inches. Dimensions shown are after swaging. Unless otherwise specified, decimal tolerances are ± .010. STRENGTH: Generates full rated breaking strength of wire rope. USAGE: Swaged to wire rope at ends or in center as control point. MS-20663 Ball and Double Shank

MS-20664 Single Ball and Shank
Click here for additional Ball and Shank Specifications.

MS-20667 Fork

MS Part No.
Stainless Steel		 For
Cable
Diameter		 As DIA.
D DIA
F
+.010
-.005
 G
±.003		 H LS
Approx.
U
DIA.
MS-20667-2 1/16 .138 + .000
- .005		 .190 + .002
- .000		 .218 .093 .500 1.75 .344
MS-20667-3 3/32 .190 .254 .108 .670 2.06 .438
MS-20667-4 1/8 .219 .383 .195 .735 2.61 .547
MS-20667-5 5/32 .250 .250 .406 .202 .800 3.00 .688
MS-20667-6 3/16 .313 .543 .260 .880 3.24 .781
MS-20667-7 7/32 .375 + .000
- .007		 .625 .296 .970 3.74 .906
MS20667-8 1/4 .438 .375 .688 .313 1.070 4.10 .969
MS-20667-9 9/32 .500 + .000
- .008		 .438 .719 .327 1.170 4.48 1.156
MS-20667-10 5/16 .563 .765 .348 1.268 4.86 1.265
MS-20667-12 3/8 .625 .500 +.005
- .000		 .830 .380 1.525 5.74 1.500
NOTES: All measurements in inches. Dimensions shown are after swaging. Unless otherwise specified, decimal tolerances are ± .010. STRENGTH: Generates full rated breaking strength of wire rope.
MS-20667 Fork


MS-20668 Eye

MS Part No.
Stainless Steel		 For
Cable
DIA.		 As DIA. C
+-.020		 D
DIA.		 J LS
Approx.		 U
+.025
-.010
DIA.
MS-20668-2 1/16 .138 +.000
-.005		 .523 .190 +.002
- .000		 .088 +.000
- .005		 1.809 .359
MS-20668-3 3/32 .190 .707 .103 2.160 .438
MS-20668-4 1/8 .219 .738 .190 2.593 .500
MS-20668-5 5/32 .250 .831 .250 .197 3.029 .640
MS-20668-6 3/16 .313 .903 .313 .255 3.187 .781
MS-20668-7 7/32 .375 +.000
-.007		 1.007 .291 3.678 .813
MS-20668-8 1/4 .438 1.133 .375 .307 4.062 .968
MS-20668-9 9/32 .500 +.000
-.008		 1.257 .438 .322 4.512 1.109
MS-20668-10 5/16 .563 1.373 .343 4.969 1.218
MS-20668-12 3/8 .625 1.688 .500 +.005
-.000		 .375 +.000
-.015		 5.968 1.500
NOTES: All measurements in inches. Dimensions shown are after swaging. Unless otherwise specified, decimal tolerances are ± .010. STRENGTH: Generates full rated breaking strength of wire rope.
 MS-20668 Eye



MS-21259 Threaded Terminals

Ms Part No.
Stainless Steel		 For
Cable
DIA.		 Threaded B*
NF-3A
UNF-3A		 As
DIA.		 D
REF.		 E
REF.		 Ls
Approx.		 R
+.005
-.000
DIA.		 U
DIA.		 Y
+.063
-.000
LH Thread RH Thread
MS-21259-2-LH MS-21259-2-RH 1/16 # 6-40 .138 + .000
- .005		 .188 .156 2.65 .063 .094 1.045
MS-21259-3-LH MS-21259-3-RH 3/32 #10-32 .190 .250 .187 3.00 1.204
MS-21259-4-LH MS-21259-4-RH 1/8 1/4-28 .219 .313 .250 3.59 1.376
MS-21259-5-LH MS-21259-5-RH 5/32 .250 3.97 1.376
MS-21259-6-LH MS-21259-6-RH 3/16 5/16-24 .313 .375 .312 4.17 .098 .125 1.453
MS-21259-7-LH MS-21259-7-RH 7/32 3/8-24 .375 + .000
- .007		 .438 .375 4.81 1.625
MS-21259-8-LH MS-21259-8-RH 1/4 .438 .500 .438 5.24 1.750
MS-21259-9-LH MS-21259-9-RH 9/32 7/16-20 .500 + .000
- .008		 .625 .563 5.75 1.875
MS-21259-10-LH MS-21259-10-RH 5/16 1/2-20 .563 .688 .625 6.27 2.000
MS-21259-12-LH MS-21259-12-RH 3/8 9/16-18 .625 .750 .688 7.06 2.250

NOTES: All measurements in inches. Dimensions shown are after swaging. Unless otherwise specified, decimal tolerances are ± .010. STRENGTH: Generates full rated breaking strength of wire rope. *THREADS: Right-hand (RH) and left-hand (LH) threads available; unless otherwise specified, right-hand threads will be furnished. These terminals are not to be used with turnbuckle barrels.

 MS-21259 Threaded Terminals


MS-21260 Threaded Terminals

Ms Part No.
Stainless Steel		 For
Cable
DIA.		 Threaded B*
NF-3A
UNF-3A		 As
DIA.		 C
+.006
-.000		 D
REF.		 E
REF.		 F
REF.		 Ls
Approx.		 R
+.005
-.000
DIA.		 U
DIA.		 Y
+-.047
LH Thread RH Thread
MS-21260-L2-LH MS-21260-L2-RH 1/16 # 6-40 .138 +.000
-.005		 .092 .188 .156 2.172 3.67 .063 .094 .375
MS-21260-S2-LH MS-21260-S2-RH 1.297 2.79
MS-21260-L3-LH MS-21260-L3-RH 3/32 #10-32 .190 .133 .250 .187 2.157 3.86 .500
MS-21260-S3-LH MS-21260-S3-RH 1.282 2.98
MS-21260-L4-LH MS-21260-L4-RH 1/8 1/4-28 .219 .195 .313 .250 2.157 4.28 .098 .125 .563
MS-21260-S4-LH MS-21260-S4-RH 1.282 3.40
MS-21260-L5-LH MS-21260-L5-RH 5/32 .250 2.157 4.66 .625
MS-21260-S5-LH MS-21260-S5-RH 1.282 3.78
MS-21260-L6-LH MS-21260-L6-RH 3/16 5/16-24 .313 .245 .375 .312 2.157 4.78 .750
MS-21260-S6-LH MS-21260-S6-RH 1.282 3.90
MS-21260-7-LH MS-21260-7-RH 7/32 3/8-24 .375 +.000
-.007		 .306 .438 .375 2.157 5.21 .875
MS-21260-8-LH MS-21260-8-RH 1/4 .438 .500 .438 2.157 5.52
MS-21260-9-LH MS-21260-9-RH 9/32 7/16-20 .500 +.000
-.008		 .361 .625 .563 2.157 5.90 1.000
MS-21260-10-LH MS-21260-10-RH 5/16 1/2-20 .563 .406 .668 .625 2.157 6.30
MS-21260-12-LH MS-21260-12-RH 3/8 9/16-18 .625 .476 .750 .688 2.327 7.01 1.125
NOTES: All measurements in inches. Dimensions shown are after swaging. Unless otherwise specified, decimal tolerances are ± .010. STRENGTH: Generates full rated breaking strength of wire rope. *THREADS: Right-hand (RH) and left-hand (LH) threads available; unless otherwise specified, right-hand threads will be furnished. Normally used in conjunction with turnbuckle barrel MS-21251. L and S designation refers to long and short shanks on threaded end. MS-21260 Threaded Terminals

Home | Corporate Profile | Design Info | Markets Served | Sales Policies | Reps | Contact
Precision Miniature & Small Cables | Fittings | MIL Spec Cable & Fittings | Push-Pull Control Assemblies
Idler Pulleys | Tools & Cutters | Thimbles | Prototype Assemblies & Kit Packages