|
Product Line »
Push-Pull Control Assemblies »
Other Types of Controls Available
Push-Pull Control
This type of push-pull assembly is ideal for choke or damper control.
Fits wire size .054˝ or cable diameter .045-.063 with C187 series casing (see Push-Pull Casing and Cores).
Locking Push-Pull Control
This control provides infinite adjustment for its entire travel. The operator can position the control where desired and then lock it in place by turning it clockwise.
Specially suited for applications where spring tension or vibration causes ordinary controls to creep.
Fits wire size .054˝ or cable diameter .045-.063 with C187 series casing (see Push-Pull Casing and Cores).
All PPC part numbers will consist of the following:
1 knob with plunger 1 lock washer
1 sleeve with face plate 1 jam nut
For assembly order please specify length of casing and wire.
Part numbers PPC11 and PPC22 are less expensive, have shorter travel, and are intended for lighter duty applications.
| Item |
A REF. |
B REF. |
D REF. |
T REF. |
| PPC1 |
31/32 |
3-9/16 |
1-1/16 |
2-1/4 |
| PPC11 |
3/4 |
3-1/8 |
7/8 |
1-1/2 |
|
 |
| Item |
A REF. |
B REF. |
T REF. |
| PPC2 |
1-3/4 |
4-1/8 |
3 |
| PPC22 |
1-5/8 |
2-15/16 |
2 |
|
 |
|
